4.8/5 Based on 10,500+ reviews

Bolura Rust Repair Paste

Helps Stop Rust From Spreading

Supports early treatment before small rust spots turn into bigger repairs

Helps Shield Exposed Metal

Creates a protective barrier against moisture, rain, and road salt

Easy Brush-On Application

Applies neatly without messy sprays, special tools, or complicated prep

Works On Common Rust-Prone Areas

Great for wheel arches, door edges, seams, and other exposed metal spots

Can Be Painted Over Once Cured

Sand it smooth and paint for a finished look, or leave it as-is underneath

Color: Silver/White

ADD TO CART
60 DAY MONEY-BACK GUARANTEE
Mastercard
American Express
Apple Pay
Google Pay
Shop Pay
Discover
Visa
Dave, Prestige Collision & Auto

Mechanic recommended

“A much easier fix than waiting until you’re dealing with a full rust-out and a body shop bill.”

Dave, Prestige Collision & Auto · Dayton, OH

Selling out fast

Due to high demand, limited quantities available.

89% sold

Ends in 00:00:00

"I've been working on cars for over 20 years, and the biggest mistake I see people make is ignoring small rust spots until they turn into expensive body work. Bolura lets you treat those spots early before they spread. You brush it on, it bonds to the metal, and it seals the area off from moisture. It's the kind of fix I wish more of my customers knew about before they show up needing a $1,200 repair."

Mike Dalton, ASE Certified Mechanic Mike Dalton, ASE Certified Mechanic

Bolura uses a rust-converting formula that bonds directly to oxidized metal on contact. Instead of sitting on top of the surface like spray paint, it reacts with the rust underneath and turns it into a stable, sealed layer that moisture and road salt can't get through.

The paste also contains a protective barrier compound that hardens as it cures, creating a tough coating over the treated area. Once it's set, you can sand it smooth and paint right over it for a finished look, or leave it as-is for long-term protection on spots where appearance doesn't matter.

Sand or wire brush any loose, flaking rust off the spot. Wipe the area clean and dry. Brush on a thin, even coat of Bolura and let it cure for 24 to 48 hours.

  • 🔧 Small spots (quarter-sized or less) — 1 thin coat
  • 🔧 Medium spots (palm-sized) — 2 coats, 24 hours apart
  • 🔧 Larger areas (fist-sized or bigger) — 2 to 3 coats, 24 hours apart
  • 🔧 One jar covers 5 to 10 typical spots on a vehicle
  • 🔧 Sand smooth and paint over once cured, or leave as-is underneath
  • 🛡️ Stops rust from spreading deeper into the metal
  • 🔒 Creates a hard barrier against moisture, rain, and road salt
  • 🖌️ Brush-on formula with no messy sprays, drips, or complicated prep
  • 🎨 Paintable once cured for a clean, finished appearance
  • 🚗 Works on cars, trucks, boats, trailers, fences, and any steel or iron surface
  • ⏱️ Most spots take about 10 minutes of hands-on time
Before & after

One Coat. Drag to See It.

Pick a spot, then drag the handle across to see it before and after Bolura.

  • Brushes on in about 10 minutes
  • No primer and no sanding down to bare metal
  • Hard and sealed in 24 to 48 hours
  • Comes in 6 colors to match your paint
Get My Bolura Jars60-day money-back guarantee
Truck bumper after Bolura
Truck bumper before Bolura
Before After

Results depend on the spot, the prep and the weather.

Real Repairs, Real Results

★★★★★4.8Based on 10,500+ reviews

2007 Toyota Tacoma after Bolura
★★★★★

2007 Toyota Tacoma

Had some ugly bubbling rust on both cab corners that was only getting worse. Cleaned it down, put Bolura on there, and honestly it came out way better than I thought it would for a $29 jar. Beats paying a body shop $400 per side.

Toyota Tacoma
MMike D.Verified buyer
2005 Chevy Tahoe after Bolura
★★★★★

2005 Chevy Tahoe

Living in Wisconsin means salt eats everything. The rust around my rear wheel arches was getting embarrassing. Applied Bolura over a weekend and now it actually looks decent again. Simple process, no special tools needed.

Chevrolet Tahoe
JJason R.Verified buyer
2009 Ford Ranger after Bolura
★★★★★

2009 Ford Ranger

My Ranger has 180k on it and the bed sides were starting to get those brown spots pretty bad. Used Bolura to clean them up before they turned into holes. Happy with how it turned out, especially for the price.

Ford Ranger
CChris L.Verified buyer
Rust bubbling back up under paint
Why it keeps coming back

The Rust You Painted Over Is Still Alive

Rust does not just sit on top of the metal. It eats down into tiny pits that sandpaper and a wire brush cannot reach. When you paint or fill over those pits, the rust underneath keeps eating. The first crack in the paint lets salt water back in, and by spring the paint is bubbling in the same spot.

  • The same bubble shows up in the same spot every spring
  • Spray converter ran down the panel before it could work
  • Touch-up paint is lifting at the edges
  • The paint flakes off under your thumbnail and it is orange underneath
One rust spot, one winter

Cover It, or Seal It Once

Follow the same rust spot through a salt-belt winter.

Drag through the winter

Touch-up paintPainted over in October
Looks fine

BoluraBrushed on in October
Sealed

Get My Bolura Jars60-day money-back guarantee
Do the math

What Would a Body Shop Charge You?

Count your rust spots and pick a typical size.

3
Body shop estimate$0Grind, fill and repaint
vs
Bolura$02 jars
You keep at least$0
Get My Bolura Jars

Shop prices are rough estimates for small cosmetic rust repairs and change a lot by area, vehicle and how far the rust has spread. Bolura is for surface rust and early spots, not holes.

Bolura
✓Thick paste that stays on vertical panels
✓Gets down into the pits before it sets
✓Changes the rust and seals it in one coat
✓Goes on in your vehicle's color
✓Every ingredient listed on the jar
✓One jar handles several rust spots
Thin Rust Sprays
✕Thin liquid that runs off rockers
✕Runs off before the pits are treated
✕Needs primer and paint on top
✕Dries to a dark stain
✕Hard to tell what is inside
✕Bought again every fall

Bolura vs. the Can on the Shelf

  • Changes it and seals it. Tannic acid turns the rust stable, then alkyd resin locks it in.
  • Stays where you brush it. Bentonite clay keeps it thick on a door edge or rocker until it is done.
  • Done in a weekend. Brush it on, let it set, and drive it.
Get My Bolura Jars60-day money-back guarantee
Bolura Rust Removal Paste
Nothing hidden

What Is In Every Jar

Every ingredient is on the label, and each one has a job.

Tannic acid
Changes the rust
Aluminum polyphosphate
Protects the bare metal around it
Bentonite clay
Keeps it thick
200# solvent oil
Carries it down into the pits
Alkyd resin
Seals it in
Titanium dioxide and barium sulfate
Give it color and body
Jar size
30g (1 oz)
Brush-onNo primer neededPaintable once set6 colorsSteel and iron

Use in a place with fresh air and wear gloves. Keep away from children.

Get My Bolura Jars60-day money-back guarantee
How it works

Fix a Rust Spot in One Afternoon

1

Clean it up

Knock off loose, flaky rust with a wire brush or sandpaper, then wipe the spot clean and dry. You do not need bare metal.

2

Brush on an even coat

Work the paste into the rust spot. Give it about 10 minutes, then wipe off anything the metal did not take.

3

Let it set

Most spots are hard in 24 to 48 hours. A bad spot can get a second thin coat the next day.

4

Drive it

Leave it as it is, or sand it smooth and paint over it. Check it before the salt starts and again when it ends.

Get My Bolura Jars60-day money-back guarantee
Who it's for

Made for Any Steel That Sees Salt

Trucks and daily drivers

Rockers, cab corners and wheel arches catch the worst of the winter spray. Seal the rust spots now before they turn into a rocker panel bill.

Tip: Do it on a dry fall weekend before the first salt.
Get My Bolura Jars60-day money-back guarantee
Bolura Rust Removal Paste
Is this for you?

Bolura Is Right for You If...

  • You plan to keep your vehicle and drive it for years
  • You have bubbles on the rockers, cab corners or wheel arches
  • You tried a spray, touch-up paint or undercoating and the rust came back
  • The metal is still solid with no holes
  • You do not want to pay a body shop or learn to weld
  • You would rather fix it in your own driveway on a weekend

If the spot is bubbling but the metal is still solid, Bolura can handle it.

Get My Bolura Jars60-day money-back guarantee
60DAYS Try it on your own vehicle

60-Day Money-Back Guarantee

Brush it on your worst rust spot and watch how it holds up. If you are not happy with the results, contact us within 60 days and we will refund your order.

Get My Bolura Jars60-day money-back guarantee
Bolura Rust Removal Paste

Got Questions?

What is Bolura Rust Repair Paste?

A thick paste you brush onto rust spots. Tannic acid changes the rust down in the pits, a thin solvent oil carries it there, bentonite clay keeps it in place, and alkyd resin sets on top into a sealed coat in your vehicle's color.

How is it different from spray paint or rust converter?

Paint sits on top of the rust and hides it. Thin converters run down a vertical panel before they finish working in the pits. Bolura is thick enough to stay on the spot until it is done, and then it seals it, so you change the rust instead of covering it.

Do I need to sand down to bare metal?

No. Knock off any loose or flaky rust with a wire brush or sandpaper, then wipe the spot clean and dry before you brush it on.

What if my color is not one of the 6?

Pick the closest one. Most rust spots are on wheel wells, rockers and door edges where a close color looks fine. For a spot people will see up close, use Silver/White and paint over it once it sets.

Can I paint over it?

Yes. Once it is fully hard, sand it smooth and paint right over it, or leave it as it is on spots where looks do not matter.

How long does it take to set?

Most spots are hard in 24 to 48 hours. Cold weather and thick coats take longer. It is ready when it feels hard, not tacky.

Will it fix holes?

No. Bolura is made for surface rust and early spots where the metal is still solid. If a screwdriver can push through the spot, it needs welding first.

How many spots does one jar cover?

Each 30g jar covers several typical rust spots, since you brush it on in thin coats. Bigger or deeper spots use more.

What can I use it on?

Any steel or iron, including cars, trucks, boat trailers, mowers, fences and gates. Wipe off anything that gets on trim or glass right away.

What if it does not work for me?

You are covered by our 60-day money-back guarantee. Contact us and we will refund your order.

Bolura is made for surface rust and early spots on steel and iron. For structural rust or holes in the metal, see a professional. Results depend on the vehicle, the spot and the weather.

Bolura Rust Removal Paste
Bundle and save

Stop the Rust Before It Spreads.

Every week of salt and slush lets the rust in the pits keep eating. Pick your bundle, mix your colors and get it done this weekend.

  • Buy 1 Get 1 Free2 jars, mix and match colors$39.99
  • Buy 2 Get 2 Free4 jars, mix and match colors$79.98
Choose My Bundle
60-day money-back guaranteeSecure checkout